Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Personal Presence - Twinning Auto On/Off

Status
Not open for further replies.

mctwan

IS-IT--Management
Sep 12, 2014
1
BE
Dear all,

I'm new to the whole mitel setup, so i apologize if I ask stupid questions.
But here's my issue for the moment.

we previously had a Siemens central, now we changed our platform to mitel, we had cordless dect phones as desk-phones in the beginning. now we changed it because of the twinning setup that your mobile device can be used as a portable device. so we did and i created a personal presence button on the 5320e devices. now if I'm in the office i press on that button and my mobile we be activated and in the evening i have to dis-activate it in order not to get any surprise phone call from the office phone.

Is there a way where you can automatic disable the personal presence with a time-frame, if it is in 1 direction meaning only switch off or switch on the presence, fine by me. then if we forget to disable it in the evening the time-frame will disable it for me.

hope you can help me with this.
 
If you use the COS option - Permanent Login, I would guess that you could change the COS to one without Permanent Login with Night Service Switching.

Just a guess, I've never tried this.

**********************************************
What's most important is that you realise ... There is no spoon.
 
If you have Auto Attendant or are using CRA, you could build an unannounced path that points to your configuration assistant DN. That way you could call in remotely, press the secret digit that points to the Config Assistant extension, enter your ext and password and turn it on and off that way.

Jim

"If I had known it would turn out like this, I would have become a locksmith" Albert Einstein

NCSS NCTS NCTE CS1000E Avaya IP Office
Mitel 3300 Basic & Advanced 5000 NuPoint I&M MiCloud
 
kwb...interesting thought...

If you could change the COS using 9860, then you should be able to achieve the same thing using a STAR timer point...maybe...

Jim

"If I had known it would turn out like this, I would have become a locksmith" Albert Einstein

NCSS NCTS NCTE CS1000E Avaya IP Office
Mitel 3300 Basic & Advanced 5000 NuPoint I&M MiCloud
 
Crowtalks is talking about a 5000

I assumed a 3300

Could you clarify the system please?

**********************************************
What's most important is that you realise ... There is no spoon.
 
LOL, you are correct, and I knew which one you were referring to because the COS in the 5000 can't be manipulated like that...but for some reason, my mind went to the 5000 VM platform...getting old sucks sometimes :)

Jim

"If I had known it would turn out like this, I would have become a locksmith" Albert Einstein

NCSS NCTS NCTE CS1000E Avaya IP Office
Mitel 3300 Basic & Advanced 5000 NuPoint I&M MiCloud
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top