Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Persistent Binding with QLOGIC board

Status
Not open for further replies.

rvsk

Technical User
Nov 20, 2006
4
BE
I' m setting up a Networker 7.3.2 environment and a LTO3 library with 4 fibre tapedrives connected to a QLA2462 on a Win 2003 server. In Networker the following paths are used: \\.\Tape0,\\.\Tape1,\\.\Tape2 an \\.\Tape3 and persistent binding is configured on the QLA2462 board. If I take out the second tape drive from the library and reboot the server, the tape paths are reordered and I have Tape0, Tape1, and Tape2.
Because persistent binding is activated, I expected to have the four tape paths in the windows registry but aparently windows scans the tape drives when the server is rebooted and does not respect the persistent binding settings.
Has anybody encountered simular problems?
Kind regards
 
I have the same problem...
If a drive is off, Windows can't see it when you reboot, and then you have to reconfigure Networker (jbconfig).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top