PERMISSION DENIED 1

[coolfalcon]

hi all,
i tried to format new NIU2 256 M byte flash card but i faced this problem : PERMISSION DENIED

<IOSII:NODE=SYSN,IODEV=SYSDISK1,BTYPE=ATA,SUBFS=SYSSUBFS11&SYSSUBFS21;
EXECUTED

<FICRI:SUBFS=SYSSUBFS11,SIZE=60;
FICRI:SUBFS=SYSSUBFS11,SIZE=60;
SURE? (YES/NO)
<Y;
NOT ACCEPTED
PERMISSION DENIED

thanks.

 

[doktor]

Restart FIP and NIP programs in LIM=1. Did you log in as level7 (highest)?

///doktor

http://www.kandu.dk/spg153996.aspx

 

[coolfalcon]

thanks for your help ,
i still have the same problem,even i restated the pbx.

see the output file

<FICRI:SUBFS=SYSSUBFS11,SIZE=60;
FICRI:SUBFS=SYSSUBFS11,SIZE=60;
SURE? (YES/NO)
<Y;
NOT ACCEPTED
PERMISSION DENIED

<RFPUI:UNIT=NIP&FIP,LIM=1;
RFPUI:UNIT=NIP&FIP,LIM=1;
SURE? (YES/NO)
<Y;
ORDERED

<
?
<O;

LOGGED OFF

SPONTANEOUS PRINTOUT

MRESTART PROGRAM UNIT
JLIM STARTED PU:S FAILED PU:S
J 1 NIP
¦ FIPM
LOGGED OFF
è
AUTHORITY CLASS 7
(c) Aastra Telecom
100 18JUL11 07:21:04 1-0-60-01 SYSTERMINAL

<FICRI:SUBFS=SYSSUBFS11,SIZE=60;
FICRI:SUBFS=SYSSUBFS11,SIZE=60;
SURE? (YES/NO)
<Y;
NOT ACCEPTED
PERMISSION DENIED

<RFEXI;
RFEXI;
SURE? (YES/NO)
<Y;

ORDERED

AUTHORITY CLASS 7
(c) Aastra Telecom
100 18JUL11 07:22:42 1-0-60-01 SYSTERMINAL

<FICRI:SUBFS=SYSSUBFS11,SIZE=60;
FICRI:SUBFS=SYSSUBFS11,SIZE=60;
SURE? (YES/NO)
<Y;
NOT ACCEPTED
PERMISSION DENIED


SPONTANEOUS PRINTOUT


RESTART EXCHANGE
STARTED LIM:S FAILED LIM:S PARTLY FAILED LIM:S FAILED PU:S
1

END

<

 

[coolfalcon]

note: the flash card is brand new and provided by Astra them self
this is the information written on the flash
SiliconDrive
CF
256 MB


and there is a Ericsson Lebel written
( CF/Subfs 11/21 )

 

[whosrdaddy]

what is the revision of your NIU card?

CNBIP:BPOS=1-0-60;

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[coolfalcon]

niu2 revision

001-0-60 NIU2 ROF 137 5396/2 R3A
CAA 1580021 R8A EXE
CAA 1580021 R5A OLD

 

[whosrdaddy]

I suspect you need a higher FW revision that supports the 256Mb card.

please upgrade to the latest version (R13A if i'm correct)

Cheers,
Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[fcpli]

You have to upgrade to R11A before R13A, if I remember...
(Daddy: If you skip the R11A, the boot part looks funny in R13A, or maybe doesn't work corrctly?)

 

[whosrdaddy]

yes indeed fcpli!

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[asuvp]

Infact there is a R14A.

And if you follow the instruction and load the NIF before the boot there are no problems.

 

[asuvp]

By the way, do you have tried with a smaller SIZE, for example 30 or 40. Sometimes the MD isn't that good at fault message.

 

[fcpli]

asuvp:

Of course you load the FW before the boot. What Imean (if you read the text properly), is that the NIU needs to be updated to R11A before R13A. Below an instruction from ///. Also, reducing the size is not the solution in this case, just let's see what happens after the update....



19112-rys102724_2_b.mx = NIF2 - BOOT R2A Checksum CRC-32: D0E8176A
19003-caa1580021_n.mx = NIF2 R11A Checksum CRC-32: 14762CFF



The procedure to download boot FW from backplane is:

1. First, the NIU2 board must have application FW R11A.
1. Transfer the file to NIU with ftp.
2. Load the application code to NIU with CNBLI.
3. Switch and confirm with CNBSI and CNBCI.

2. Watchdog
1. Check that watchdog is turned off with niux command:
wd
2. If it is not turned off, turn it off with niux command:
wd -m0

4. Download boot FW R2A using the following commands:
1. Transfer the boot file to NIU with ftp.
2. Load the boot code to NIU with CNBLI.
3. Confirm with CNBCI.

5. (Optional step)
Turn on watchdog with command:
wd -m1

 

[coolfalcon]

dear all,
thanks all for your help
i will try the upgrade as soon as i get the firmwares.

how can i get the new firmware?

 

[whosrdaddy]

through your local Aastra Partner, or if you have access to InfoChannel, you can get it there...

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[coolfalcon]

thanks all for your help
i tried the format with NIU2 R13A and it works

thanks all

 

[asuvp]

fcpli:

If you follow the instruction: load NIF then check the watchdog then load boot, you can load the latest directly. There is no need to take the step via R11A.

 

[coolfalcon]

it works also