Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Performance Problem on Celerra. How can determine the MAX IO LEVEL?

Status
Not open for further replies.

nb45

IS-IT--Management
May 19, 2003
94
CO
Hello.. Currently we are experience a high IO level over our NS-480 with the following configuration..
EMC Celerra NS-480-- 1
4GB FC Host Ports -- 12
1GB Lan Port ------- 4
Cache Memory ------- 16GB
EFD 100GB DISK ----- 5
146GB 15K FC DISK ---5
300GB 15K FC DISK ---80
600GN 15K FC DISK ---39
1TB SATAII 7.2K DISK-22

Do you know how i can establish the Max IO level on this system? I not sure if i have problem of this way or are related with some configuration issue.

If you can provide some guide, rule to establish this i appreciate it.
.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top