Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PDF Document 1
- Thread starter MSTRtec
- Start date
-
1
- #2
kpescatore
MIS
Hi,
All you need to do is drag the attribute into to the Group by section. You will need to pull the attribute from the report that is set as the Primary Dataset.
If the group by section is not at the top above the doc then you need to go to the View menu and select groupings and the section should show up.
Hope this helps,
Keith
All you need to do is drag the attribute into to the Group by section. You will need to pull the attribute from the report that is set as the Primary Dataset.
If the group by section is not at the top above the doc then you need to go to the View menu and select groupings and the section should show up.
Hope this helps,
Keith
- Status
Similar threads
- Locked
- Question
- Locked
- Question