Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PCMCIA IRQ Conflict

Status
Not open for further replies.
pau75

pau75

Technical User
Feb 25, 2004
16
US
I'm trying to set up a wireless network at home. In one computer I have a 2wire (SBC Standard) dsl router and a 2Wire USB Access Point that I recently purchased, this PC is running under WinME .In the other one, running under WinXP, I installed a PCMCIA slot in a PCI also a 2Wire. To that point, everything is fine. The problem comes when I insert the PCMCIA card in the computer: I get an IRQ conflict. The system is assinging the IRQ 00 to the PCMCIA card and crashing with the system timer.

I already tried to install the PCI card in other PCI slots and uninstall and reinstall everything again, but I still have the same problem. I also looked into the BIOS and it does not have a tool to configure the IRQ or PnP.

Any ideas how to solve this?

Thanks

 
Status
Not open for further replies.

Similar threads

HarryWild
  • Locked
  • Question
N Wireless Express Card to PCMCIA Adapter
Replies
2
Views
63
HarryWild
HarryWild
Kujen
  • Locked
  • Question
IP-adress in conflict..?
Replies
6
Views
66
Kujen
Kujen
FaroukH
  • Locked
  • Question
ip adress conflict
Replies
5
Views
29
bpinning
bpinning
jediwarrior
  • Locked
  • Question
IP Address Conflict 1
Replies
1
Views
28
Frank4d
Frank4d
axalex
  • Locked
  • Question
Wireless Adapter USB/PCI/PCMCIA
Replies
1
Views
31
TimTang
TimTang

Part and Inventory Search

Sponsor

Back
Top