PCMCIA BKO on Opt.11

[Phoneyguy1]

Can anyone help with why I get a failure when I do a BKO? Card is in correctly and will load completely on another Opt.11 using same card.

.BKO
Starting database backup to PCMCIA drive b:
c:/u/db/config.rec ok
c:/u/db/database.rec ok
c:/u/db/inet.db ok
c:/u/db/mob_data.db FAILED
c:/u/db/mud.db FAILED
DATABASE BACKUP FAILED

EDD007


.
EDD000


.
TEMU112 Error occured backing up external data base
Check that PCMCIA data drive is properly inserted

 

[tnjwinters]

I have two Option 11c's running 25.40b that back-up fine. I have one 11c running 25.30 that gets the same error's that you get. On the one with errors, I archive instead of using BKO.

 

[acewarlock]

Try EDD CLR

 

[tnjwinters]

Tried it. Didn't change anything.

 

[acewarlock]

Have you tried a new PCMCIA

 

[Phoneyguy1]

I am usine new SANDISK PCMCIA 64M cards formated. I still get the error.

 

[jsty]

found this on Nortel site:
Fact:
Option 11C
22.46
PCMCIA card in slot B
Using the BKO command

Symptom:
Unable to do a back up to PCMCIA Card.
Error TEMU112
Backup will not complete

Cause:
The BKO command is used for the original M11 and the backup cartridge only.



Problem Resolution

Fix:
Install the PCMCIA card in slot A, and use the ARCHIVE command in ld 143.
Refer to NTP 553-3021-310 Software Installation Guide, Chapter 8, Archiving and Removing databases.