JimAntonic
Technical User
Does anyone know if there is a non-SGI copper gigE that will work in an SGI machine? I was thinking I could get one from 3com and save some $$$. Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PCI-X Copper Gigabit Ethernet card
- Thread starter JimAntonic
- Start date
- Status
I think Phobos makes one.
Be careful though..............
If you are running AppleTalk on the SGI machine, the Phobos card doesn't (or didn't use to) support multi-casting.
Further the SGI copper card didn't support AppleTalk between 6.5.20 and 6.5.22
My advice would be to get an SGI copper card and use IRIX 6.5.16 or 6.5.24
Best regards
Be careful though..............
If you are running AppleTalk on the SGI machine, the Phobos card doesn't (or didn't use to) support multi-casting.
Further the SGI copper card didn't support AppleTalk between 6.5.20 and 6.5.22
My advice would be to get an SGI copper card and use IRIX 6.5.16 or 6.5.24
Best regards
- Status
Similar threads
- Locked
- Question
- Locked
- Question