Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

pc starts but no output to the monitor 1

Status
Not open for further replies.

lawrenzo

Technical User
Oct 16, 2004
2
0
0
GB
Here's the story,

My hard drive became faulty so I replace it, on reboot my bios showed that I had lost 128 mb of memory - I removed 1 128mb memory dimm from the slot and my system would start but no output to the display.

I replace the good 128mb of memory but I still had the same issue. I bought brand new memory that is the same and I still have this problem - Have I blown the motherboard?

please help
 
With both a harddrive going bad, now possible bad motherboard and memory - I'd start to wonder if it's the power supply that's putting out some bad voltages and causing failures.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top