Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PBX Time going ahead
- Thread starter 11480
- Start date
bigindian65
Technical User
ld 2
SDTA
TIME ADJUSTMENTS
tdta 0 100 0 negative 1 positive
would be 60 seconds.. the book does say 100 ms
so tdta 0 50
would be 30 seconds
Mato' Was'aka
SDTA
TIME ADJUSTMENTS
tdta 0 100 0 negative 1 positive
would be 60 seconds.. the book does say 100 ms
so tdta 0 50
would be 30 seconds
Mato' Was'aka
LD 2
Set daily time adjustment
The time of day can be adjusted during the midnight routines to
compensate for a fast or slow system clock.
To print the current adjustment: TDTA X y
To set the adjustment: SDTA X y -- X Y
Legend
x = 0 (negative increment) or 1 (positive increment)
y = 0-25 second adjustment in increments of 100 ms
OLD ROLMEN WORKING ON NORTELS AND AVAYA
Set daily time adjustment
The time of day can be adjusted during the midnight routines to
compensate for a fast or slow system clock.
To print the current adjustment: TDTA X y
To set the adjustment: SDTA X y -- X Y
Legend
x = 0 (negative increment) or 1 (positive increment)
y = 0-25 second adjustment in increments of 100 ms
OLD ROLMEN WORKING ON NORTELS AND AVAYA
Firebird Scrambler
Programmer
This may help below.
Patch 10301..... for 22.46 and 23.47.
Patch 10301 prevents: SYSTEM CLOCK RUNNING 4 SECONDS TOO FAST EACH DAY
Problem:
Customer is complaining that the system clock is running too fast - about 4 seconds a day. Customer relies on the displays of the sets for the time of the day. Customer tried to adjust time in overlay 2 by the command "SDTA", which made no difference.
Setup and duplication method
Duplicated on customer site and was unable to stop clock from advancing 4 seconds a day. Reseated CP cards still no difference. Upgraded software still no difference.The customer is setting the time and date from the ATOMIC clock.
Expected results
For customer not to have to adjust time and date.
Actual results
System clock running to fast.
All the best
Firebird Scrambler
Meridian Programmer in the UK
If it's working, then leave it alone!.
Patch 10301..... for 22.46 and 23.47.
Patch 10301 prevents: SYSTEM CLOCK RUNNING 4 SECONDS TOO FAST EACH DAY
Problem:
Customer is complaining that the system clock is running too fast - about 4 seconds a day. Customer relies on the displays of the sets for the time of the day. Customer tried to adjust time in overlay 2 by the command "SDTA", which made no difference.
Setup and duplication method
Duplicated on customer site and was unable to stop clock from advancing 4 seconds a day. Reseated CP cards still no difference. Upgraded software still no difference.The customer is setting the time and date from the ATOMIC clock.
Expected results
For customer not to have to adjust time and date.
Actual results
System clock running to fast.
All the best
Firebird Scrambler
Meridian Programmer in the UK
If it's working, then leave it alone!.
- Status
Similar threads
- Locked
- Question