I am looking for a way to program an Autodial function on a key for a 1230, that will enter all needed digits to get to the destination. For example to dial into my conference bridge, I want the Autodial to dial like I have to do manually 918002331234pp4567#p*1p23456#*8 or calling into CallPilot to record a group distribution list message 6199p#12345#75p6916666##5.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Pause and other digits * # for entering string of digits for confernce call codes and CallPillot
- Thread starter Ryckee
- Start date
EddieDuece
IS-IT--Management
Not sure if it would work but have you tried to program it as a hot dial key? I have the following programmed on my phone.
key 05 HOT D 12 918666684692
key 05 HOT D 12 918666684692
I don't think you can try the dialing string you want. Asterisk (*) is the pause in the string. If you try going out a PRI, then all digits will be collected and sent out at once. Try sending out on a COT using the ACOD. Example my ACOD=2000, CallPilot thru-dialer = 4562000, and I want to call out to extension 2550.
Example:
key 2 hot d 31 2000*4562000**2550
Hope that helps?
Example:
key 2 hot d 31 2000*4562000**2550
Hope that helps?
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question