Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
patches
- Thread starter chomca
- Start date
The following procedure is for updating all of your filesets to the latest
patch levels.
1. Go to tral
2. Run oslevel -s to get your maintenance level (used below)
3. Run lslpp -Lc >lslpp_out.txt (you will need to upload this file to IBM).
4. Click on the "Download" tab
5. Agree to the Terms & Conditions
6. Follow the ftp instructions that appear.
7. Untar your patch bundle somewhere /var/tmp/patch
8. As root run inutoc
9. Then run smit update_all
10. Enter "/var/tmp/patch" in the field for "INPUT device / directory for
software" and press ENTER.
11. Scroll down to "ACCEPT new license agreements?" and press tab
12. Press ENTER to begin the software installation (takes a few minutes).
13. Esc+0 to exit smit
14. reboot
Regards,
Khalid
patch levels.
1. Go to tral
2. Run oslevel -s to get your maintenance level (used below)
3. Run lslpp -Lc >lslpp_out.txt (you will need to upload this file to IBM).
4. Click on the "Download" tab
5. Agree to the Terms & Conditions
6. Follow the ftp instructions that appear.
7. Untar your patch bundle somewhere /var/tmp/patch
8. As root run inutoc
9. Then run smit update_all
10. Enter "/var/tmp/patch" in the field for "INPUT device / directory for
software" and press ENTER.
11. Scroll down to "ACCEPT new license agreements?" and press tab
12. Press ENTER to begin the software installation (takes a few minutes).
13. Esc+0 to exit smit
14. reboot
Regards,
Khalid
- Status
