PATA HDDs on P5AD2 E not recognised properly in Dev Man

[shoricelu]

Hi.
I recently bought a p630 Prescott along with Asus P5ad2 E Deluxe mobo (925 chipset). I bought also 1 SATA Seagate (7200rmp NCQ) HDD and 2 PATA drivers (200gb WD 8M cache (UDMA mode5) and 80GB Deskstar(UDMA mode 6) hdds).
On the motherboard I have 4 SATA Connectors and 3 IDE connectors. The upper ide connector is next to FDD connector and I connected the DVD RW unit. The other 2 IDE connectors are in the lower part of the motherboard and it says that they are parto of the IT8212 IDE controller (for RAID).
BUT i don't want any RAID. I just want JBOD.
The problem is that in Device Manager I have only one.

The device manager list:
Intel 82801FB Ultra ATA Storage Controllers 2652
Intel 82801FB/FBM Ultra ATA Storage Controllers 266F

Primary Ide Channel - device 0 - CTM UDMA mode 2
Primary IDE Channel - device 1 - Not aplicable
Primary Ide Channel - device 0 - CTM UDMA mode 5
Primary IDE Channel - device 1 - Not aplicable
Secondary IDE Channel - device 0 - Not aplicable
Secondary IDE Channel - device 1 - Not aplicable
Secondary IDE Channel - device 0 - Not aplicable
Secondary IDE Channel - device 1 - Not aplicable

In BIOS I have treated SATA as ATA (not RAID).
Are there any special drivers? I installed from mobo cd the
IT8212 ATA RAID controller.

Thank you for any advice!
Bogdan