PAT config help!?!

[Netw3rk]

PIX515E|| I'm fairly new to PIX, so bear with me.

If possible, I'd like to setup my PIX to do the following. I have 3 interfaces: inside, outside, dmz.

ip address outside 1.2.3.4 255.255.255.240
ip address inside 172.27.110.1 255.255.255.0
ip address dmz 172.27.100.1 255.255.255.0

I need to have internal IP's 172.27.110.50-.52 outbound traffic look like it's coming from dmz IP 172.27.10.50. Is this possible? If so, how do I configure my global statements and such. Thanks in advance!

-Aaron

 

[baddos]

You can't use a private IP address on your outside if your outside is a public address.