Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

password

Status
Not open for further replies.

gooddy

Technical User
Jan 7, 2008
25
LC
I forgot the password for my callpilot mini. Does anyone know how I can get in or is there a higher level password I can use?
 
Call Pilot Mini is the PBX version?
Not sure on that.

But if you mean 100 or 150 then you can do this via F985,9
You need to refer to the Setup and Operation Guide for Call Pilot or any other Norstar vmail system for password to reset.

If it's PBX try this forum:


=----(((((((((()----=
curlycord
 
Try using from a M7310 / M7316 terminal the following method

How to reset the Call Pilot Mini Admin passcode

1. Get to any mailbox greeting message and press 8* as if logging into mail remotely
2. Listen to options and select “login” (1)
3. Enter mailbox number 1000#
4. Enter mailbox passcode (default 0000 but try 1234 or 4321)
5. Enter 8 0 8
6. At enter new passcode prompt enter 73738767793# (Spells RESETSMPSWD)
7. Enter # again when requested
8. The admin passcode has now been reset to 0000#

The other way is via Telnet access

All the best

Firebird Scrambler
Meridian Programmer in the UK

Useful Nortel forum at
If it's working, then leave it alone!.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top