NewToo
Technical User
- Jun 11, 2001
- 136
can someone tell me how to do a password recovery on bay network AN router
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
password recovery on a baynetworks access node
- Thread starter NewToo
- Start date
- Status
This should help...
1. Power Down router
2. Jump jumper S16 at the front of the Unit, behind the LEDs
3. Power up the router, it will go to a diag prompt
4. Type following: rb c00000 20; this displays the passwd
wb c00000 0 20;this clears the pasword - sets it to 0
5. Power down the router
6. Remove jumper
7. Power up the router.
1. Power Down router
2. Jump jumper S16 at the front of the Unit, behind the LEDs
3. Power up the router, it will go to a diag prompt
4. Type following: rb c00000 20; this displays the passwd
wb c00000 0 20;this clears the pasword - sets it to 0
5. Power down the router
6. Remove jumper
7. Power up the router.
- Status
Similar threads
- Locked
- Question
- Locked
- Question