Password Protection on 1220/1230 ip phones

[waiora1]

Hello World

I am wondering if anyone can help me as I am kind of new to the world of phone systems.
I have had a request for a phone to be placed in a warehouse and to be able to dial an outside line but it needs to be password protected before getting an outside line. If this is possible.

Kind regards

 

[KCFLHRC]

So you want the whole phone password protected or just restricted from dialing outside until a code is put in? In house calls would be allowed without a password or not?

 

[Firebird Scrambler]

Just configure up an AUTH code to be used via FFC.

Firebird Scrambler
Nortel and Avaya Meridian 1 / Succession and BCM / Norstar Programmer

Very advance high level knowledge on the Linux BCM phone system.

Website

http://somertel.com

 

[waiora1]

KCFLHRC (TechnicalUser)

Hi Thanks for the quick response. I just want to restrict the phone from outside calls until a code is put in. Inhouse calls will be allowed without password.

 

[Firebird Scrambler]

You need to change the NCOS in programming to a more restrictive table of your choice.

Firebird Scrambler
Nortel and Avaya Meridian 1 / Succession and BCM / Norstar Programmer

Very advance high level knowledge on the Linux BCM phone system.

Website

http://somertel.com