Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

passport to meridian problems...

Status
Not open for further replies.

mikeyb123

Programmer
Jul 1, 2003
1,801
GB
Hi,

We have a problem....

we have a 8600 sw ver PCR 5.2.2 and its connected to a meridian option 81 via some mcdn links, Dual PRI in the Meridian and 4pE1Mvpe in the passport

the mcdn ccts that are in one slot (5) work fine and we are able to make calls from the meridian via the passport to the remote site. the card in slot 4 of the passport rejects the call with the following Dchannel message:

DCH 23 OMSG SETUP REF 0000001E CH 11 30 TOD 20:07:41
FEAT :NCID
PROGRESS: ORIG ADDR IS NOT ISDN
CALLING #:6405 NUM PLAN: PRIVATE
CALLED #:5206008 NUM PLAN: PRIVATE
DCH 23 IMSG REL COMP REF 0000001E CH 11 30 TOD 20:07:41
CAUSE :UNASSIGNED NUMBER


Now I know that all teh channels from the meridian work as we've tested them to card 5. I know that the number plan in the passport works, and the wierd thing is that calls can be received via card 4 but not made.

The card has been swapped out and the same fault occurs.

Anuone got any clues?

It's not getting any smarter out there. You have to come to terms with stupidity, and make it work for you.
 
sorry should be 7400 passport.....

It's not getting any smarter out there. You have to come to terms with stupidity, and make it work for you.
 
fixed it in the end..

needed a reboot to put it all back in it's place.

good to see nortel still on form....

It's not getting any smarter out there. You have to come to terms with stupidity, and make it work for you.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top