Passport 8600 , HW Error Message *Need Help*

[xyCruiseryx]

Hello,

I have a Problem with these Message.

HW WARNING fm_mem_alloc_internal: Master is using next available block.<000>
2005-02-27 23:32:38 Local7.Error 192.168.10.10 CPU5 [02/27/05 22:42:32] HW INFO System activity performed<000>
2005-02-27 23:40:39 Local7.Error 192.168.10.10 CPU6 [02/27/05 22:57:35] HW WARNING fm_mem_alloc_internal: Master is using next available block.<000>
2005-02-28 08:40:35 Local7.Error 192.168.10.10 CPU6 [02/28/05 07:40:35] HW WARNING fm_mem_alloc_internal: Master is using next available block.<000>


The Message show up in time-diffrence in the Log of Passport 8600. Have somebody a idea what maybe the problem of these message???

 

[Googer]

What processors/Switch Fabrics are you using? I have not seen this message but I do know that 8690SF blades required a memory upgrade to run the newer versions of code. One the 3.5.8 code it will actually tell you at boot-up that the system does not have enough memory but then will boot normally like it is working properly. I have never actually had it fail though because I caught the boot message and swapped the memory upgrade in.

Hope this helps,

Googer

 

[xyCruiseryx]

Hello, thanks for answer, the running system is a 3.7.4, the SwitchFabric is the 92SF with 256 MB RAM. The memory is checked and oki.

The special is that the passport hast 2 Cpus and after a switchover we have the same message in the log only from slot 6 and not 5 like the message is sending before.