Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Passport 1624G with TLAN & ELAN on the same fiber?

Status
Not open for further replies.
Loki131

Loki131

Technical User
Dec 12, 2003
13
US
In my system (new 1000 E&T install) I have 7, 48 port baystacks all seperated from each other and connected to a Passport 1624G Fiber router. I'm somewhat familiar with Hubs and routers but this is a complicated beast. I have the Device manager installed so that I can get into the GUI interface and see that I have all (7) fibers connected, and I have enabled the ports and built another VLAN. What I'm unfamiliar with is how to join both of the VLANS to all of the ports on the 1624G so that I can get connectivity between my 48port Baystacks.
Any suggestions?

ELAN ip scheme is 129.56.15.X
TLAN ip scheme is 29.56.15.X

My Baystacks are set up with the top (odds) as the ELAN and the bottom (evens) as the TLAN.
Spanning Tree disabled except for ports 47 and 48


 
Status
Not open for further replies.

Similar threads

ashwincjoshi
  • Locked
  • Question
Issue with CDP Configuration on Nortel CS1000 - One Number Works, One Doesn't
Replies
1
Views
216
Firebird Scrambler
Firebird Scrambler
dan miller
  • Locked
  • Question
elan/tlan 1
Replies
1
Views
67
bignose21
bignose21
Mokpokpo Agbovon
  • Question
Replace M2250 Consoles with 3904 Digital Sets
Replies
5
Views
238
gbtac3
gbtac3
Trason
  • Question
e911 on rls 7 where to start
Replies
1
Views
199
gbtac3
gbtac3
jpanzer
  • Locked
  • Question
Any information/firmware on the M5317T ISDN phones?
Replies
0
Views
86
jpanzer
jpanzer

Part and Inventory Search

Sponsor

Back
Top