Pass Thru Outside Line

[donkc1]

Hi,
I have a merlin legend CKE3 R7 V12, and was wondering how I would go about programming it so I can pass thru outside lines directly to extension(s). I want to do this so I can take advantage of the 3 way calling I have on one of the lines. I have the 3rd button on an MLX 10 setup so that when you pick up the receiver, you get dialtone, and dial, but it doesnt' seem to like the 3way, always hangs up on the 1st person you put on hold before second dial tone.

Thanks in advance.

 

[merlinman]

Put a RECALL button on the extension and that should do it.

At the Phone, pres FEATURE ZERO ZERO > Touch a BLANK BUTTON > DIAL *775, and press ENTER.

Then press HOME.

That should do it.

 

[donkc1]

Thanks Merlinman, that's exactly what I was looking to do. Works like a charm. Thanks again.