Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Partner Voicemail Access

Status
Not open for further replies.

AKZ3BR

Vendor
Dec 26, 2013
5
US
I have a Partner ACS with voice messaging PC card. The system was working ok with Auto attendant but
after power failure the system defaulted to generic message instead of recorded message. Can't access
voicemail programming using intercom 777 get busy signal. Any help would be appreciated.
 





Excellent, Thanks
One other thing The auto attendant transfers call to the extension when selecting the code 1,2,3,4,etc.
I would like to changes one of those extensions. what program # do I access to change.
Again Thanks
 
That's within the voicemail itself, not in the phone system programming.

Log into mailbox 0, listen for the option to change selector codes, pick your code, then pick your function and destination extension.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top