Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Partner Voice Messaging

Status
Not open for further replies.

phonemom

Vendor
Dec 13, 2005
44
US
My customer has Partner Voice Messaging, R3- Large. The Selector Code programming repeatedly reverts back to the default. All other programming stays in tact except this. Any knowledge of a fix for this? Thanks.
 
Default the programming and reprogram. It always seems to fix strange issues like the one you are experiencing. To default the PVMS log in to the System Administrator 0#, password, dial 9998925327. The system will say something along the line of,"you system will be returned to factory settings....Goodbye" In about a minute you can log in again and reprogram.

A.J.
 
But if it fails a second time, you will need to replace the PC card. They DO go bad! I had one that held the configuration for 2 days, then it would default everything except the announcements for the AA.

....JIM....
 
Thank you very much for the advice. I'll try this and see what happens in a couple of days.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top