Partner Ssystem module placement 1

[retiredtelco]

Installing an ACS Partner in a large parking garage. Slot P Partner ACS R7.0, Slot 1 308EC, Slot 2 308EC, Slot 3 Partner ACS 012, Slot 4 Partner ACS 012. All ports will be supportting single line wall phones placed throughout the multi story garage. All ports will be programmed the same. No access to outside line (s). Extension 10 will be at the receptionist telephone in the lobby. All phones will be pointed to extension 10 in lobby .

Two questions, does it matter where I place the 308EC and 012? I know that you can only have two 012 modules in a five slot carrier. Second question, I am only getting up to extension 57, which is the last port in the second to the last port of either a 308EC or 012 in slot 4. Is this correct?

 

[TouchToneTommy]

ACS supports only 48 extensions, 10 through 57, so that last port on the last card is not going to be available for use.

I would put them in with the 308's in slot 1 and 2, and the 012 in 3 and 4

 

[retiredtelco]

TTT you are the man, that is exactly where I was thinking of placing the modules.