Partner "Hotline" Feature

[fojin]

I was testing out several of the features of the system, inclusing the "HOTLINE" feature outlined on the "System Flow Chart" It said that you enter the extention of the phone, and then the extention to foward the calls to.

The system worked, and the selected extention rang when using the other phone, BUT... I want to remove this "Hotline" now.

The instructions in the Flow Chart say to press the "REMOVE" button, but I don't know which button it's referring to. What button would I use to Remove this configuration?

Thanks so much for any help you can provide!

 

[ttech]

From the phone with the button while in programming mode press the button you programmed as hotline the press the Mic key.

 

[TouchToneTommy]

If you're using an 18 button display phone for programming, and don't have the overlay, go to the 4th column and press the 2nd button down from the top. Also, the "enter" button (used for the disallow/allow tables is the 3rd button down.