I recently removed a good, working PCVM 3.0 small [ 4 box ] voice mail card from a ACS 6.0 processor.
When I tried to install it in a new ACS 7.0, after powering up, the green light on the ACS lights up, but none of the sets came up ...no display, no dial tone....nothing..all sets
I tried it in two other ACS 7.0 units and got the same results.
Then I tried it in a different ACS 6.0 and it worked great.
Is it possible that it is a older 4 box 3.0 and not compatible with the newer 7.0 processors???
I never had this problem with a older large [ 8 box ] 3.0 voice mail cards in the 7.0 boards.
Hmmmm,,,stumped
Thanks in advance for any help.
When I tried to install it in a new ACS 7.0, after powering up, the green light on the ACS lights up, but none of the sets came up ...no display, no dial tone....nothing..all sets
I tried it in two other ACS 7.0 units and got the same results.
Then I tried it in a different ACS 6.0 and it worked great.
Is it possible that it is a older 4 box 3.0 and not compatible with the newer 7.0 processors???
I never had this problem with a older large [ 8 box ] 3.0 voice mail cards in the 7.0 boards.
Hmmmm,,,stumped
Thanks in advance for any help.