Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Partner Messaging volume issues

Status
Not open for further replies.

NiceRing

Vendor
Jan 13, 2012
349
US
Is it possible to have bad ports on a Partner Messaging System? When I am accessing 777 for system admin, randomly I get a lot of static. Is this possible?
 
What version are you running? At one time there was a upgrade card for those, could also be the unit is going south
 
Try accessing each individual port assigned to the voice mail hunt group. If they all sound horrible, then I would restart the processor. If that doesn't clear the problem, then the voice mail is going bad.

If the problem is with a single port, and, there are enough other ports to support the location, you could just remove that one port from the hunt group and use the remaining ones. [smile]

I [love2] "FEATURE 00"
 
On the first question, I don't know, have to check that out.

Second reply, really good ideas Dexman! I will try those tips.
Thanks!
 
Is it static or garbled? Garbled voicemail was an issue with some Partner Mail VS unit. A soft reset took care of it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top