Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Partner Messaging Automated Attendant says "tranferring to Oper" twice
- Thread starter rspringer
- Start date
- Thread starter
- #3
They sure are. It is wierd. I have set the system up to ring all extensions on a 0 out from the AA. I have the 0 selector code set to transfer to Intercom 71 and have all of my stations programmed into #502, Calling Group 1. I have set all lines on the extensions for a delayed ring. It should work with no problem. Sometimes it will only say it once and ring to all the extensions flawlessly but most of the time it says "Transferring to the Operator" twice. In between the first and second time it will give a little chirp. I have no idea what could be the cause.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question