following the manual when i turn on the cabinets the lights on all the other cards light up but the vsr3.0 doesnt light up i opened up the module and found the 3 pin ic strapped to a transformer was burned loose from the power supply board after resoldering it and reinserting it still no lights is if possible to swap a board from one of the other modules and if not where can i get this power supply the number highlighted in red is 847128782 any ideas the fuse on the power supply is good i already tested it. also ive looked at everything i can find about the expansion cards and cant find which one i have its comcode is 847189783 any ideas on this thanks in advance for any help. ps do these units have a problem with the power supplys
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Partner mail vs r3.0 power supply is it bad
- Thread starter manersj
- Start date
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question