Partner Mail PM04 serial port password 1

[ts312]

I have a few Partner Mail PM04 units to repair/test etc.. on at least one of them it boots up but I can not log in with serial number as the password.
As a test, I swapped the Hard Drive from a working unit to the trouble unit, it boots up and works, but I had to use the serial # of the working unit to log in.
So that means the password/serial number is stored on the HDD, which tells me the HDD must have been swapped at some point.
How can I reset the password if the serial number is not working?

 

[TouchToneTommy]

Re-Serializing the Disk Drive
To re-serialize the disk drive:
1. At the MERLIN LEGEND MAIL administration menu, type b.
2. Enter the password to shut down the MERLIN LEGEND MAIL system.
3. When prompted, type y to verify that you want to shut down the system.
4. When the MERLIN LEGEND MAIL administration menu reappears, press
the ESC key.
5. At the prompt, type mmsz, press the SPACEBAR once, and then type the
six-digit serial number from the bar code label on the top of the disk drive.
An example of what you type is:
mmsz 123456
where 123456 is the six-digit serial number from the bar code label on
the top of the disk drive.
6. Press the ENTER key.
7. Type mm and then press the ENTER key.
The MERLIN LEGEND MAIL administration menu appears.
8. Type a.
You are prompted to enter the password.
9. Enter the password.
The MERLIN LEGEND MAIL administration menu displays the serial
number and the system is up.


If you are not able to get in with the serial number, find my website for access to more information

 

[Dexman]

I'm guessing that the procedure for the Partner Mail is the same as the Merlin Mail.

I "FEATURE 00"

http://dexman.webs.com/