Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Partner - Assign Phone 30 to Voice Mailbox 50

Status
Not open for further replies.

wylieinc

IS-IT--Management
Jan 22, 2007
2
US
Hi - Im trying to get Phone 30 to ring when someone dials 50 in the AA. I am hoping this will allow direct dial ect.
Any advice where to look would be greatly appreciated.
Have a Partner ACS 6.0.3

Can this system do hot phones like IP Office does?

Thanks again
 
You can assign Selector Code #5 to do a Selector Code Transfer to x30.

Are you referring to "Hot Desking"? If so, I'd say no. Partners are much less sophisticated than IP Office. It's not really fair to compare the two anyway; they are targeted to wildly different customer sizes and types.

You can certainly have several users share a single extension and mailbox, but it would be the personal responsibility of each individual user to sort out whose messages are whose. This strategy usually doesn't work out well.

The capability to "login so that the PBX can uniquely identify one of many users of a single extension" isn't part of the feature set. Partner users are permanently assigned a particular extension.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top