Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Partner ACS system totally down
- Thread starter hostlynx
- Start date
TouchToneTommy
Vendor
Do you have your ACS in a 5-slot carrier? If so, you may have blown the fuse in the carrier backplane.
Remove the AC power cord from the left side of the carrier, remove the ACS from the carrier, and plug the cord directly in the back of the ACS. If it powers up, suspect the carrier unit. Remove all other modules, and plug the ACS back in. If if powers up, add one module at a time (powering down while connecting modules), and see if you can bring it back up, or find a bad module causing everything else to fail.
Barring that, call your vendor and have them bring some spares out with them!
Remove the AC power cord from the left side of the carrier, remove the ACS from the carrier, and plug the cord directly in the back of the ACS. If it powers up, suspect the carrier unit. Remove all other modules, and plug the ACS back in. If if powers up, add one module at a time (powering down while connecting modules), and see if you can bring it back up, or find a bad module causing everything else to fail.
Barring that, call your vendor and have them bring some spares out with them!
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question
