I have noticed on the avaya support page. >communications systems>partner ACS>R6> there is a smdi card that is used for screenpops etc. Can it be true? It seems promising
-Don
-Don
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Partner ACS SMDI card
- Thread starter ttech
- Start date
- Status
- Thread starter
- #2
I found this online searching +partner +acs +smdi
Partner ACS R6.0 – May 2003
There is currently a new Release scheduled for May of 2003. This will be Release 6.0 in the Partner ACS line of Communication Systems.
Features and Enhancements you can expect to see include the following.
T1 Module (2 way E&M, 16 voice channels, CSU). NOTE: DOES NOT SUPPORT PRI
DID with T1 only
Cell Phone Connect with T1 only. With this feature turned on, the Partner ACS will simultaneously ring your cell phone along with your desk phone
Remote Call Forwarding. Forward off site. Does not require T1.
Display Number Dialed until overwritten
ICLID Display on AA transfer. Currently system says ‘Auto Attendant’ if call flows through auto attendant.
Adjustable Hold Reminder. Currently is standard at 60 second reminders that you have someone on hold. Will be adjustable on this release.
PC Administration only. Will replace Remote Admin software, and will allow the following additional administration features.
T1 administration
DID administration
All Lines busy event
Station Copy
Electronic serial number for 308ACS & 308EC modules
SMDI for 6.1
Partner ACS R7.0 – March 2004
There is currently a new Release tentatively scheduled for March of 2004. This will be Release 7.0 in the Partner ACS line of Communication Systems.
Features and Enhancements you can expect to see include the following.
Improved Processor (higher density, higher value for price)
LAN Port
USB Port
Option for more line capacity
Platform for future growth
PRI with T1
Enhanced remote support
Additional features as requested by Business Partners
Partner ACS R6.0 – May 2003
There is currently a new Release scheduled for May of 2003. This will be Release 6.0 in the Partner ACS line of Communication Systems.
Features and Enhancements you can expect to see include the following.
T1 Module (2 way E&M, 16 voice channels, CSU). NOTE: DOES NOT SUPPORT PRI
DID with T1 only
Cell Phone Connect with T1 only. With this feature turned on, the Partner ACS will simultaneously ring your cell phone along with your desk phone
Remote Call Forwarding. Forward off site. Does not require T1.
Display Number Dialed until overwritten
ICLID Display on AA transfer. Currently system says ‘Auto Attendant’ if call flows through auto attendant.
Adjustable Hold Reminder. Currently is standard at 60 second reminders that you have someone on hold. Will be adjustable on this release.
PC Administration only. Will replace Remote Admin software, and will allow the following additional administration features.
T1 administration
DID administration
All Lines busy event
Station Copy
Electronic serial number for 308ACS & 308EC modules
SMDI for 6.1
Partner ACS R7.0 – March 2004
There is currently a new Release tentatively scheduled for March of 2004. This will be Release 7.0 in the Partner ACS line of Communication Systems.
Features and Enhancements you can expect to see include the following.
Improved Processor (higher density, higher value for price)
LAN Port
USB Port
Option for more line capacity
Platform for future growth
PRI with T1
Enhanced remote support
Additional features as requested by Business Partners
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question