Partner ACS R7.0 Paging w/ nite ring

[grunt68]

Just installed an ACS 7.0 5x9 plus 400E 2 slot carrier to replace an old Samsung system. Customer wants loudspeaker paging w/ nite ring capabilities. Is there a way to set this up?. Using a Valcom 2000A plus a self amp horn hooked up to line port#9.

 

[TouchToneTommy]

If you like Valcom, add a V-9924C C.O. Audible Ringer - wire it to a spare station port, programmed for No Ring, but added to the Night Service Group.

Similar (possibly less expensive) products can be found at Viking Electronics.

 

[grunt68]

Ok, thanks Tommy, you say connect to Partner ext port, ok and just wire on top on paging port connection into Valcom 2000?

 

[TouchToneTommy]

Yup, the tone output gets wired in parallel with the paging output - so either ring tone or page will come over the speakers.

 

[grunt68]

Great, simple enough, you the man!! Thanks Tommy.

 

[grunt68]

By the way, could you help on setting Night Group?

 

[TouchToneTommy]

a spare station port, programmed for No Ring, but added to the Night Service Group.[\quote]

Put a Night Service button on Ext. 10, and the station will start ringing.