Partner ACS R6.0 Time Issue?

[tshirley04]

I have a site that is experiencing differing display times on their 18D and 34D Partner phones. This time difference is changed via Feature 00, Left Intercom twice, #103 on extension 10. However, the phones eventually get out of synch with the system again and display various times. Has anyone had this happen on PACS R6.0 and what was the resolve? Thanks in advance!

 

[itpphoneguy]

Hi tshirley04,
All the phones display the time on the processor. They should all read the same. The ACS does not keep great time.
Try to reset the phone system and see if that helps.
-Chris

 

[hbiss]

Only time I've seen that happen is when you unplug and reconnect a phone and not very often either. Maybe that's what's happening? After awhile it should correct itself though without doing anything.

This is with all Partner processors not necessarily the ACS R6.0.

I've never heard of what you are talking about. If a reset doesn't work (#728 or simply turning the system off then on) try another processor.

-Hal