Partner ACS (R1 - R6) Paging Contact Rating

[capcoms]

Does anyone know what the Volt and Amp rating is for the page port contact on the Partner ACS (R1-R6)?

I have searched thru manuals, Avaya's website and several tech websites and can not find the info anywhere.

You would think it would be included in the electrical spec part of the manual but it's not.

Thanks in advance

 

[mforrence]

The intent of this contact is to activate an external relay, not to carry any real load. If your application is such that you need to worry about the rating of the contact, best bet would be to use an external relay and save the heartache...
Mike

 

[capcoms]

Your response "The intent of this contact is to activate an external relay, not to carry any real load" is exactly why I am asking. I need to know what voltage and amperage the contacts are rated for because I am using them to entergize a larger relay.

 

[mforrence]

I don't see the spec in the book... I have used 12 & 24VDC relays in the past with no trouble. Contact in relay generally draws 50mA or less.
Mike