Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Partner ACS Auto Attendant and Night Service

Status
Not open for further replies.

AMG910

IS-IT--Management
May 20, 2022
2
US
Customer has a Partner ACS R6 with two lines. Customer is looking to use Auto Attendant during the day for overflow calls. Currently working fine with VMS Hunt Schedule (#507) to Always and VMS Hunt Delay (#506) to 4 rings. However, customer wants to set a night service button that, when pressed, the Auto Attendant immediately answers (0 rings) and routes calls. In other words, "day mode" will use Auto Attendant for overflow and "night mode" will use Auto Attendant as primary call handler. For the life of me, I cannot figure out which combination will do what the customer wants. Any help?
 
#503 "Night Service Button" press 3 to select a button on Ext. 10
#506 Mode 1=day rings (4) Mode 2=night rings (0)
 
Thank you. The settings you provided solved the issue.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top