Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

partner 2 loud noise

Status
Not open for further replies.

biggiedave

Technical User
Apr 9, 2002
28
US
narrowing the problem down , after a complete restart of system phone 12-d started making a loud DO DO DO DO DO DO DO DO noise and didnt function at all. un plugged it for a few min then back in it seemed to work ok for a while then dead bad phone? or bad 206? other 2 phone on system seem to be working fine.running 2x206 3 lines 3 phones.ver 3.0
TIA
 
Does this happen in a different port with the same phone? Try it in one of the ports of the switch you currently have a phone that is working on. If it works good, bad port, if it has probs, bad phone.. Matt Wray
CCNA, MCP
mwray77518@yahoo.com
 
The problem is the MLS-12 phones. The buttons flex starts shorting out will randomly short buttons out. The choice is to get phone repaired or replaced the new euro phones don’t have a flex; a new flex should last for 3-5 years. I had
Drew Communications
Lucent Voice Mail and Component Repair Specialists
Lucent Brokers/Resellersdrew@triton.net
616-498-9213
Do the work for me before with great results.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top