Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Partitioning 9117-570

Status
Not open for further replies.
ogniemi

ogniemi

Technical User
Nov 7, 2003
1,041
PL
In full partition profile the system have following resources:

# lscfg
INSTALLED RESOURCE LIST

The following resources are installed on the machine.
+/- = Added or deleted from Resource List.
* = Diagnostic support not available.

Model Architecture: chrp
Model Implementation: Multiple Processor, PCI bus

+ sys0 System Object
+ sysplanar0 System Planar
* vio0 Virtual I/O Bus
* vsa0 U9117.570.65C2BCF-V1-C0 LPAR Virtual Serial Adapter
* vty0 U9117.570.65C2BCF-V1-C0-L0 Asynchronous Terminal
* pci2 U7879.001.DQDFYDD-P1 PCI Bus
* pci12 U7879.001.DQDFYDD-P1 PCI Bus
+ fcs2 U7879.001.DQDFYDD-P1-C1-T1 FC Adapter
* fscsi2 U7879.001.DQDFYDD-P1-C1-T1 FC SCSI I/O Controller Protocol Device
* fcnet2 U7879.001.DQDFYDD-P1-C1-T1 Fibre Channel Network Protocol Device
* pci10 U7879.001.DQDFYDD-P1 PCI Bus
+ sisioa0 U7879.001.DQDFYDD-P1 PCI-X Dual Channel U320 SCSI RAID Adapter
+ scsi0 U7879.001.DQDFYDD-P1-T12 PCI-X U320 SCSI RAID Adapter Physical bus
+ hdisk0 U7879.001.DQDFYDD-P1-T12-L3-L0 16 Bit LVD SCSI Disk Drive (73400 MB)
+ hdisk1 U7879.001.DQDFYDD-P1-T12-L4-L0 16 Bit LVD SCSI Disk Drive (73400 MB)
+ hdisk2 U7879.001.DQDFYDD-P1-T12-L5-L0 16 Bit LVD SCSI Disk Drive (73400 MB)
* ses0 U7879.001.DQDFYDD-P1-T12-L15-L0 SCSI Enclosure Services Device
+ scsi1 U7879.001.DQDFYDD-P1-T13 PCI-X U320 SCSI RAID Adapter Physical bus
+ hdisk3 U7879.001.DQDFYDD-P1-T13-L3-L0 16 Bit LVD SCSI Disk Drive (73400 MB)
+ hdisk4 U7879.001.DQDFYDD-P1-T13-L4-L0 16 Bit LVD SCSI Disk Drive (73400 MB)
+ hdisk5 U7879.001.DQDFYDD-P1-T13-L5-L0 16 Bit LVD SCSI Disk Drive (73400 MB)
* ses1 U7879.001.DQDFYDD-P1-T13-L15-L0 SCSI Enclosure Services Device
+ sisraid0 U7879.001.DQDFYDD-P1-C9-T1 PCI-X U320 SCSI RAID Adapter Logical bus
* pci11 U7879.001.DQDFYDD-P1 PCI Bus
* ide0 U7879.001.DQDFYDD-P1-T15 ATA/IDE Controller Device
+ cd0 U7879.001.DQDFYDD-P4-D1 IDE DVD-ROM Drive
* pci13 U7879.001.DQDFYDD-P1 PCI Bus
+ fcs3 U7879.001.DQDFYDD-P1-C2-T1 FC Adapter
* fscsi3 U7879.001.DQDFYDD-P1-C2-T1 FC SCSI I/O Controller Protocol Device
* fcnet3 U7879.001.DQDFYDD-P1-C2-T1 Fibre Channel Network Protocol Device
* pci1 U7879.001.DQDFYDD-P1 PCI Bus
* pci6 U7879.001.DQDFYDD-P1 PCI Bus
+ ent2 U7879.001.DQDFYDD-P1-C3-T1 2-Port 10/100/1000 Base-TX PCI-X Adapter (14108902)
+ ent3 U7879.001.DQDFYDD-P1-C3-T2 2-Port 10/100/1000 Base-TX PCI-X Adapter (14108902)
* pci7 U7879.001.DQDFYDD-P1 PCI Bus
+ ent4 U7879.001.DQDFYDD-P1-C4-T1 2-Port 10/100/1000 Base-TX PCI-X Adapter (14108902)
+ ent5 U7879.001.DQDFYDD-P1-C4-T2 2-Port 10/100/1000 Base-TX PCI-X Adapter (14108902)
* pci8 U7879.001.DQDFYDD-P1 PCI Bus
+ fcs0 U7879.001.DQDFYDD-P1-C5-T1 FC Adapter
* fscsi0 U7879.001.DQDFYDD-P1-C5-T1 FC SCSI I/O Controller Protocol Device
* fcnet0 U7879.001.DQDFYDD-P1-C5-T1 Fibre Channel Network Protocol Device
* pci9 U7879.001.DQDFYDD-P1 PCI Bus
+ fcs1 U7879.001.DQDFYDD-P1-C6-T1 FC Adapter
* fscsi1 U7879.001.DQDFYDD-P1-C6-T1 FC SCSI I/O Controller Protocol Device
* fcnet1 U7879.001.DQDFYDD-P1-C6-T1 Fibre Channel Network Protocol Device
* pci0 U7879.001.DQDFYDD-P1 PCI Bus
* pci3 U7879.001.DQDFYDD-P1 PCI Bus
* pci4 U7879.001.DQDFYDD-P1 PCI Bus
+ usbhc0 U7879.001.DQDFYDD-P1 USB Host Controller (33103500)
+ usbhc1 U7879.001.DQDFYDD-P1 USB Host Controller (33103500)
* pci5 U7879.001.DQDFYDD-P1 PCI Bus
+ ent0 U7879.001.DQDFYDD-P1-T6 2-Port 10/100/1000 Base-TX PCI-X Adapter (14108902)
+ ent1 U7879.001.DQDFYDD-P1-T7 2-Port 10/100/1000 Base-TX PCI-X Adapter (14108902)
+ L2cache0 L2 Cache
+ mem0 Memory
+ proc0 Processor
+ proc2 Processor
+ proc4 Processor
+ proc6 Processor
#

I need to create 3 partitions - the best without virtual I/O and micropartitioning.

First partition requires 2 internal disks and 2 CPUs and 4 GB memory (minimum 2GB / desired 4GB).

Second partition requires 2 internal disks, 1 CPU and 4 GB memory (minimum 2GB / desired 4 GB).

Third partition requires 2 internal disks, 1 CPU and 2 GB memory (minimum 1GB / desired 2GB).


Do I need virtual I/O configuration for internal disks usage? I have 6 internal disks - 2 for each partition, but it seems to be on one adapter.

# lsslot -c slot
# Slot Description Device(s)
U7879.001.DQDFYDD-P1-C1 Logical I/O Slot pci12 fcs2
U7879.001.DQDFYDD-P1-C2 Logical I/O Slot pci13 fcs3
U7879.001.DQDFYDD-P1-C3 Logical I/O Slot pci6 ent2 ent3
U7879.001.DQDFYDD-P1-C4 Logical I/O Slot pci7 ent4 ent5
U7879.001.DQDFYDD-P1-C5 Logical I/O Slot pci8 fcs0
U7879.001.DQDFYDD-P1-C6 Logical I/O Slot pci9 fcs1
U7879.001.DQDFYDD-P1-T4 Logical I/O Slot pci4 usbhc0 usbhc1
U7879.001.DQDFYDD-P1-T6 Logical I/O Slot pci5 ent0 ent1
U7879.001.DQDFYDD-P1-T12 Logical I/O Slot pci10 sisioa0
U7879.001.DQDFYDD-P1-T14 Logical I/O Slot pci3
U7879.001.DQDFYDD-P1-T15 Logical I/O Slot pci11 ide0
U9117.570.65C2BCF-V1-C0 Virtual I/O Slot vsa0
#


Can anyone give me some hints how to do it in a few steps? How to assign required number of disks to my partitions?


thx,
r.m.
 
Sort by date Sort by votes
You can have multple dual channel scsi adapters according to IBM hardware support.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

cchiang12
  • Locked
  • Question
p5-570 to a p6-570
Replies
2
Views
52
khalidaaa
khalidaaa
aixquest
  • Locked
  • Question
Can not upgrade system firmware on 9117-MMA
Replies
4
Views
103
p5wizard
p5wizard
khalidaaa
  • Locked
  • Question
UPS solution for P5 570 2
Replies
13
Views
89
khalidaaa
khalidaaa
HelgeZZ
  • Locked
  • Question
error BFE4C025 on IBM 9117-570
Replies
5
Views
589
p5wizard
p5wizard
khalidaaa
  • Locked
  • Question
Installing Windows on IBM P5 570 using VMWare 2
Replies
6
Views
63
khalidaaa
khalidaaa

Part and Inventory Search

Sponsor

Back
Top