Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Park Keys on 9641

Status
Not open for further replies.

TheSmash

Technical User
Oct 16, 2009
994
GB
Hi guys,

Just a quick one. The Park keys don't light up on the 9641's when other users Park a call. I'm having to ask which park key they have let them on! They work otherwise. Just the little box is supposed to change colour and it doesn't.

However, when I park a call, the box changes colour.

Tom - as you have one of these can you test? I'm still on the 7 beta but the phone is R28 firmware.

ACSS (SME)

I never touched anything...
 
Can you try this:

Enable the two lines on the bottom of the screen.
This gives different kind of appearance.

Also a blf shows horizontal lines which are hard to see

The 2 extra lines of button do show that much better either.

BAZINGA!

I'm not insane, my mother had me tested!
 
Ah-ha! Never seen that before. Will see if that's any better.

Thanks.

ACSS (SME)

I never touched anything...
 
Hmm, still no BLF indication of parked calls.

Am updating to 7.0.5 this evening hopefully this will fix...

ACSS (SME)

I never touched anything...
 
i've got the buttons set up as per tlpeters suggestion but get the same thing.

if i park it on the 9641 i see the key light up. if i park to that slot from another handset it doesnt light up on the 9641, but i can still use the key to retrieve the call.

Still on the trial build myself, upgrading to GA in around 1 minute. i'll try again then :)

ACSS-SME
fo shizzle ma nizzle.
 
Cool, let me know if it fixes it. I seem to remember it working in the trial but with R27 on the phone, but I'm not sure.

I'm waiting until 5pm to do mine.

ACSS (SME)

I never touched anything...
 
I get a dotted red line at the top if i have it on park

Kyle Holladay
ACSS & APSS SME Communications
MCP/MCTS Exchange 2007
Adtran ATSA, Aruba ACMA

"I have one speed, I have one gear...GO!!!" - Charlie Sheen

"Thinking is the hardest work there is, which is the probable reason why so few engage in it." - Henry Ford
 
User BLF works fine (Green for DND???) just not Park.

Will let you know if 7.0.5 fixes (if Tom doesn't beat me to it!)

ACSS (SME)

I never touched anything...
 
...or even worse, an IPNC config!

ACSS (SME)

I never touched anything...
 
Me too. Bah! Pub it is :)

ACSS (SME)

I never touched anything...
 
Just found another thing on the 9641;

Attention ring doesn't work. I.e. on a call on CA1 and second call comes into CA2 but no audible chirp.

Anyone else confirm this is the same for them?

ACSS (SME)

I never touched anything...
 
@Echo off
Echo *******************
Echo * Friday Solution *
Echo *******************
Pause
format c: -u



ACSS - SME
 
Yup same for me. has been that way since the first release. it has never had the ring. even if you set it to constant in manager.

Kevin Wing
ACSS Small and Medium Enterprise (SME) Communications
ACS- Implement IP Office
ACA- Implement IP Office
Carousel Industries
 
I'm 15 minutes away from beer...

ACSS (SME)

I never touched anything...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top