Paradyne CSU/DSU - channelized T1

[kelsjon3]

We have a customer with two Legends networked with Paradyne 3160 CSU/DSUs. We need to use the unused T1 channels for data. Any insight on how to connect a Paradyne 3160 to a router?

Thanks

 

[franke]

If I'm not mistaken, there should be 2 data port connectors on the rear of the Paradyne unit(s). You will also have to configure the unused 'channels' for data, set the port type (i.e.: V.35, EIA 530, RS-449, or X.21) you will also need the correct interface cable, depending on port type). There are other settings as well.

franke