PLease guide me for keeping my server up an running
Following are the errors
we are using UNIXWARE 7.1.1 SCO business addition
THis server was installed 7Months back.
Oracle 8i is running on it
SCSI hard disk
Following is the message displayed on the screen when we start the machine , and after the machine displayes this message it again reboots..
Panic:Kernel-mode adress fault on user adress 0X00000006
Kernel page fault from (cs:eip) = (00000100:C006040)
eax=00000006 ebx=D7AAEF84 ecx=D7AAC400 edx=C081384C
csi=00000006 edi=D788F050 ebp=00000001 esp=D5B3A6D0
Raw Stack dump begins at 0XD5B3A6D0
6D0 D7AAC400 D7AAEF84 00000006 D78AEI00 C04317C0 D7AAC400 D788F110 C008cc62
6F0 D788F110 D7AAC400 00000006 D7AAC400 D788F0C0 D7AAC444 D7AAC440 D788F0C0
.
.
.
..
.
.
.
.
.
.
.
.
.
7F0 D76DF640 D76DF7D4 0000006 00001000 00000000 D76DF960 00000006 0000000
Generating selective dump
Saving system memory image for crash analysis
Following are the errors
we are using UNIXWARE 7.1.1 SCO business addition
THis server was installed 7Months back.
Oracle 8i is running on it
SCSI hard disk
Following is the message displayed on the screen when we start the machine , and after the machine displayes this message it again reboots..
Panic:Kernel-mode adress fault on user adress 0X00000006
Kernel page fault from (cs:eip) = (00000100:C006040)
eax=00000006 ebx=D7AAEF84 ecx=D7AAC400 edx=C081384C
csi=00000006 edi=D788F050 ebp=00000001 esp=D5B3A6D0
Raw Stack dump begins at 0XD5B3A6D0
6D0 D7AAC400 D7AAEF84 00000006 D78AEI00 C04317C0 D7AAC400 D788F110 C008cc62
6F0 D788F110 D7AAC400 00000006 D7AAC400 D788F0C0 D7AAC444 D7AAC440 D788F0C0
.
.
.
..
.
.
.
.
.
.
.
.
.
7F0 D76DF640 D76DF7D4 0000006 00001000 00000000 D76DF960 00000006 0000000
Generating selective dump
Saving system memory image for crash analysis