Panasonic TES824 1

[cirennet]

New TES824 installed and want extension 108 to call all extensions 101-107. 108 is connected to a phone interface module for a automated gate and needs to ring all extensions when someone is at the gate.

Many thanks

 

[obtsystems]

There are no groups on the tes so you cant get it to call all extensions, if you have a spare extension and co port, you could loop the spare extension to the co port and it will ring all the phones

 

[cirennet]

Currently only using co1 and co2 and extension ports 1-4 and 8 for the gate.
How could this be achieved.

Many thanks

 

[obtsystems]

You could get the panasonic door phone and opener
There is extension group that will hunt from ext to ext when busy or no answer but not all at once

 

[cirennet]

If I use jack 8 as ext 108 and run a lead from jack 7 ext 107 to CO3 and then dial 107 from 108 would all the phones ring but then is there a way of disabling co3 to not accept going call go pressing 9 on a phone skips it.

Thanks

 

[obtsystems]

Yes in co settings uncheck idle line access for lime 3