Panasonic TDA200 integration with TOA paging system

[RV482]

Hi!

We have an existing TDA200 and we are looking at interfacing the TOA paging amplifier so we can use the phones as a microphone for announcements. I've read the manual but no specific detail was provided except the CPU has a paging port.

Can I confirm that we will plug the Paging port of the TDA to the Microphone port of the TOA? If yes, how do we get the extension(s) to access it? Is there any programming required like access codes etc?

I can provide other details if needed.

Thanks!

 

[obtsystems]

You can plug into the mic port on the system. By default depending on system firmware should page out on •3332 you can program what paging groups go out on the Amp

 

[RV482]

Thank you for the assistance on this, just to clarify *3332 can be used for ALL extension within the group enrolled even analog phones?

Also on the paging group programming, theres 1st - 01, 2nd: 32, do I have to change this or leave at default. It has the same grouping for all extensions.

Please advise. Thanks!