Panasonic PABXs interconnected over a Microwave Link 89KM apart - Direct extension dialing problem

[Wanet Telecoms Ltd]

Scenario
Two Panasonic PABXs (KX-TDA100D & KX-TEM824) interconnected over a Microwave Link 89KM apart and working fine, the gateway in use are Level One VOI800X series

Problem
Extension users at either ends have to dial 9 to access external line (FXS from the Gateway connected to the trunk port) then dial the extension number at the other end.

Numbering plan
KX-TDA100D – 100, 101, 102 … 132
KX-TEM824 – 200, 201, 202 … 224

Required
I need to have the extension users at each of the PBXs dial the extension numbers directly without having to first dial 9 to cease the trunk line

NOTE
How would setting to pre-dial 9 via hotline affect a user who wants to make a trunk call to the PSTN?

I will appreciate any guidance in the right direction.

 

[obtsystems]

the 824 is analogue and is not designed to do that, what you have working is the best you will get with that system in the mix

 

[Wanet Telecoms Ltd]

Okay, thanks OBT. I will then have to leave it that way

 

[obtsystems]

The tda could do it to the tes if you use 2 in other system in number plan and tie table to route to the trunks for the connection to the 824

but not the other way around