Panasonic NS700 SIP and Client

[raist3001]

Has anyone been able to get a SIP extension to work with the NS700 using a SIP client like BRIA?

I have my SIP card installed, and I can create and use SIP extensions internally with no issues.

I would like to use a SIP EXT for an iPhone using the Bria App.

I have opened the ports on our firewall to port FWD to the PBX. But I am unable to register.

 

[raist3001]

Actually, I just got it to register.

I needed to Port FWD UDP 12000-12255 and the app has registered.

However when I dial an extension I get a 403 forbidden.

 

[obtsystems]

You have to have the proxy server set on the sip for external acces set to the port on the system ports and media gateway. Also the sip phone as to be set to remote

 

[TheCoreWithin]

not only those ports ..

example its sip / so 5060 udp

keep in mind the firewalling

Panasonic TDA/TDE/NCP/NS Series

 

[raist3001]

All the ports I need to open according to the Panasonic Media Gateway document are open on my firewall. Including those that need to be internally routed to the DSP IP.
According to Panasonic, they have tested with Media5 and not Bria. Either way both apps register just fine, but I am unable to make any outbound or internal calls. I am now getting a 408 error, peer not responding.
A wireshark capture shows that this response is coming from the PBX. I have the proper licensing so no issue there.

 

[TheCoreWithin]

and what the log (sip log) off the NS says?
what does teh NS think he calls?

Panasonic TDA/TDE/NCP/NS Series