Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PANASONIC KX-TDA200 initialize problem.

Status
Not open for further replies.

jmk333

Vendor
Nov 14, 2023
1
AR
Good afternoon everyone, last week we had an electrical problem and the TDA200 has stopped working, the green light flashes for a few seconds and then turns on together with the red light for about 3 seconds and starts the process again. In the area where the SD card is connected there is another status light, it also turns on as if it were trying to read the SD but it couldn't.
I can't access via USB and all the cards are red, any ideas? I attach a link with a video of the problem Link Thank you.
 
 https://www.youtube.com/shorts/EpgZP_w8C5s
Have you tried changing the PSU?

wanetelecoms@gmail.com
 
JMK333,

I'm just seeing your post. What was the outcome; bad PSU, Blown CPU or both?

Thanks,
Quaz
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top