Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Panasonic KX-NS 500 Power Off

Status
Not open for further replies.

Dodeka

Technical User
Mar 26, 2020
1
AR
Panasonic KX-NS 500 Turns off after 96 hours or more ...
the truth is that I no longer know where to start
I did a hard reset
Power supply seems to work fine
 
Probably is a problem in power supply card. The last version is PNLP8531YW .
Try to replace, I have had several with the same problem.
 
I have had similar problems also.
kizo, maybe Dodeka has old PBX with PNLP2290 power supply. In this case does not use PNLP8531Y.
 
Mike_K These are all the compatibile modules
PNLP2290 is first production release from 2015.
Improve version is PNLP8531YZ, next is PNLP8531YX and last revision is PNLP8531YW .

PNLP8532 is for NS700NE/UK , its compatile but it dont have battery connector
 
kizo, mike k
Thanks for the reply.
So, have you had the same problem with this model?
This Pbx has PNLP8532 power supply (I have a schematic diagram)
Impossible to think of changing the Power Supply in my country due to costs, in addition, Panasonic is gone.
I am a repair service technician, I will try to repair it, but for now I have no clues, but if they assure me that the same thing happened, and that the Power Supply was responsible for the defect, I can try
Thanks in advance!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top