Panasonic KX-NCP500 Maintenance Console

[boyadine]

Tips I want to share:

- via PC's Control Panel you must first change Network Adapter settings of TCP/IPv4, make it a fixed Ip address something like 192.168.0.100
- connect your PC to the Panasonic via the MNT port
- Install software Panasonic UPCMC V7.8.1.1 (download it via

http://www.jayaperkasa.com/p/download.html)

- during install select AL for Australian models
- the programmer "code" can be INSTALLER or ADMIN
- the password is 1234 (unless it was changed, in which case you have the option of doing a system reset which will change password to the default 1234)