AussieSA1
IS-IT--Management
- Nov 8, 2012
- 3
Hi I was trying to rig up a TVP100 voice mail system to the DT1232. I think I got the wire connections wrong on the Krone block. After trying to establish the voice mail box extention and port numbers my System will not ring out on the ISDN lines set as CO 9 and CO 10. It will receive call inwards ok.
Also the LED for any particular extention will no longer light up when pick up the handset for that extention?
I have tried re seting the system to original. no difference. I had a tech come out who told me it was the ISDN line. Telstra have done a check and say the PABX is sending the code *42*01# when either CO button is pushed that would normally grab the outside line.
Any help would be greatly appreciated.
What wiring connection should I use from the TVP100 to the DT1232 for a 4 wire DTFM D-PITS connection?
Thanks.
Also the LED for any particular extention will no longer light up when pick up the handset for that extention?
I have tried re seting the system to original. no difference. I had a tech come out who told me it was the ISDN line. Telstra have done a check and say the PABX is sending the code *42*01# when either CO button is pushed that would normally grab the outside line.
Any help would be greatly appreciated.
What wiring connection should I use from the TVP100 to the DT1232 for a 4 wire DTFM D-PITS connection?
Thanks.